Rosco - Bubble Fluid

Rosco - Bubble Fluid

from 62.73

Rosco Bubble Fluid Bubbles are fun! Whether bringing joy and laughter to a party or creating an enchanting, effervescent atmosphere for any spectacular event, a room full of bubbles makes everyone smile. Rosco, the original innovator of safe, water based fog and smoke fluids, now brings that same attention to quality and safety to Bubble Fluid.

Rosco Bubble Fluid is a premium, universal solution suitable for use in all bubble machines. This purpose engineered formula creates the maximum density of brightly iridescent bubbles that fly higher and float longer than other fluids. And most importantly, these bubbles remain dry and will not leave behind a slippery surface nor harm sensitive electronics like lighting or sound desks.

Size:
Quantity:
Add To Cart

FINISH: Matte.

SOLVENT: Water.

BINDER TYPE: Vinyl Acrylic.

DILUTION: Use straight out of the can. If necessary, dilute with water. Diluting Chroma Key paints may make coverage less even.

SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough prime as a final preparation.

APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin, even, uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.

FILM THICKNESS: 2 mil. Dry Film.

VOC CONTENT: Max 50g/L.  

COVERAGE: Appx 300 sq. ft. per gallon.

AVG. DRY TIME: AT 75°F (24°C) Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours.

CLEAN-UP: Soap and water.

SHELF LIFE: Minimum 24 months.

PACKAGING: Quart (0.946L), 1 Gallon (3.79L), 5 Gallon (18.95L)

COLOR SPECIFICATIONS:

Color

Phase Angle

Luminance

#05710 Chroma Key Blue

342°

52

#05711 Chroma Key Green

242°

57